Front suction arm
PRODUCT INFO
directly to your mobile phone
Technical details:
- Overload arm (suction arm) with articulated joint 8"
- Two hydraulic slewing rings 6"
- Turbo filler 6" – for docking the transport drums
- Complete length of the two three-point hitch adjustable to 5.50 meters
- Transport width of the front docking arm 1.95 meters
- Length of the suction arm 3.20 meters
- Incl. 8" quick coupler (Italian system) – front direction of travel right; mounting on both sides possible; Other coupling systems available on request
- Incl. slurry scraper 6" double-acting (for venting) and slurry scraper 8" with mechanical hand lever (for lateral attachment)
- Incl. docking funnel 8" (front)
- Hydraulic hand pump as attachment aid for the front suction arm
- Standpipe ends in the middle with an 8" screw flange and a 15° screw-on flange
- Supplied complete with fitted hydraulic lines and hoses
- Control of the slewing rings: 2x double-acting (SVK/Bgr. 3)
- Control of the turbo filler: Load sensing between clutch incl. pressure level; Connection LS: SVK/Bgr. 4 and SVK/Bgr. 2 for control line)
- Net weight: approx. 680 kg
Features:
- Suction arm hydraulically swivelling
- A slurry scraper including vent empties the suction arm
- No leakage after decanting
- No getting on and off the tractor
- Support point for suction arm in transport position
- Support pressure adjustable
- Coupling piece and ventilation slider, hydraulically swivelling
- Lower part as a hollow body to open to ballast it with additional weight
- Lower part for front hydraulics (can be filled with ballast
Transferring slurry made easy!
- Stable hydraulic swing
- Two-chamber system for weight balancing
More info about the front suction arm?
Get product information now
Scan now!